Products

Americas

United States

Anticorrosive primers

New construction primers

Corrosion protection

Corrosion protection - atmospheric

Heat resistant coatings

Jotatemp 250

A heat-resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250°C.

Heat-resistant coating to temperatures between -196°C and 250°C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Anticorrosive primers

Penguard HSP ZP

Penguard HSP ZP is a fast drying, high-build epoxy coating with active zinc phosphate.

Pigmented with active zinc phosphate
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Penguard HSP

Penguard HSP is a fast-drying, high-build epoxy coating for new construction.

Fast dry-to-recoat
Fast dry-to-handle
Low temperature application

Anticorrosive primers

Penguard WF

Penguard WF is a waterborne anti-corrosive epoxy coating for new construction.

Versatile waterborne epoxy
Very low VOC emissions
Contributes to green building standard credits

Heat resistant coatings

Epoxy HR

A heat-resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

Heat-resistant up to 205°C continuous
Suitable for maintenance
Can be applied on hot substrates up to 150°C

Anticorrosive primers

Penguard Express ZP

A fast drying and high build epoxy coating pigmented with active zinc phosphate.

Pigmented with active zinc phosphate
Fast dry-to-recoat
Fast dry-to-handle

Heat resistant coatings

Jotatemp 1000 HT

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

Resistant to temperatures from -196°C to 1000°C
Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
Can be applied on hot substrates up to 250°C

Anticorrosive primers

Penguard Express

Penguard Express is a fast drying, high-build epoxy coating.

Fast dry-to-recoat
Fast dry-to-handle
Wide application temperature range

Heat resistant coatings

Jotatemp 1000

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

Resistant to temperatures from -196°C to 1000°C
Optimized performance on carbon steel and ceramic substrates
Can be applied on hot substrates up to 250°C and accepts St2 surface preparation

Anticorrosive primers

Penguard HSP MIO

Penguard HSP MIO is a fast-drying, high-build epoxy coating enforced with MIO for new construction.

Enforced with Micaceous Iron Oxide (MIO)
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Penguard Express MIO

Penguard Express MIO is a fast-drying, high-build epoxy coating enforced with MIO for new construction.

Enforced with Micaceous Iron Oxide (MIO)
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Pilot QD Primer

Pilot QD Primer is a one-component oxidatively drying alkyd primer with zinc phosphate.

Fast drying
One component - reduced waste

Showing 12 of 12 items