Products

From chemically resistant paints to maintenance coatings, Jotun’s solutions offer protection against corrosion while keeping optimal water quality. Find all the products you need to protect water works below.

Tankguard 412
Tank linings

Tankguard 412

This solvent-free tank lining is suitable for potable water, grey water and crude-oil tanks.

  • Tank lining with good chemical resistance
  • Approved for potable water
Tankguard DW logo
Tank linings

Tankguard DW

A solvent-free lining designed as a primer and finish coat for drinking-water tanks and pipes.

  • Lining for drinking-water tanks and pipes
  • Solvent free
  • Very good application properties
Jotun Penguard Universal Logo
Anticorrosive primers

Penguard Universal

Penguard Universal is a fast-drying, abrasion-resistant universal epoxy coating.

  • Multipurpose
  • High robustness
  • Abrasion resistant
Jotun Penguard Pro GF Logo
Anticorrosive primers

Penguard Pro GF

Penguard Pro GF is a glass-flake reinforced, all-round anti-corrosive coating for use all year.

  • Fast dry-to-recoat
  • Fast dry-to-handle
  • High build
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Jotun Resist 65 Logo
Anticorrosive primers

Resist 65

Resist 65 is a 65% zinc ethyl silicate primer for corrosive environments.

  • Designed for corrosive environments
  • High-volume solids
  • 65% zinc dust content
Penguard Shield GF logo
Anticorrosive primers

Penguard Shield GF

A polyamine cure high build pure epoxy coating that is glass flake reinforced.

  • High build GF reinforced epoxy primer applicable up to 500 µm in one coat
  • Abrasion resistant
  • Applicable with St2 surface treatment
Powder coatings

Jotaguard VA

Specifically designed as an anti-corrosion coating for valves and fittings.

  • Corrosion protection for valves and fittings
  • Drinking-water safe
  • WRc listed
jotun Jotamastic 87 Logo
Anticorrosive primers

Jotamastic 87

Jotamastic 87 is a surface-tolerant high build epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • More than 30 years track record
  • Long lifetime in high corrosivity environments
Jotun Proguard Logo
Anticorrosive primers

Proguard

A two-component, polyamine-cured epoxy mastic paint with high-solids and high-build properties.

  • High solids
  • Approved for potable-water standards
  • Can be used as a single-coat system
Jotun Penguard Fulfill SF Logo
Building - exterior

Penguard Fulfill SF

Penguard Fulfill SF is a two component, solvent-free epoxy filler used for concrete protection.

  • Excellent water resistance
  • High strength filler
  • Compressive strength higher than concrete
Resist 78 KV logo
Anticorrosive primers

Resist 78 KV

A moisture curing inorganic zinc silicate coating with 80% zinc for severe corrosive environments.

  • Fast curing at low temperature
  • Less sensitive to low humidity
  • Mud crack resistant
Jotun Marathon 550 Logo
Anticorrosive primers

Marathon 550

Marathon 550 is a surface-tolerant, abrasion-resistant epoxy primer for high corrosivity areas.

  • Surface-tolerant
  • Can be applied on damp surfaces
  • High abrasion and impact resistance
Tank linings

Chemflake Special

A glass-flake reinforced, fast-curing vinyl ester coating with extreme chemical resistance.

  • Extremely high acid and chemical resistance
  • Exceptional lifetime
  • Quick return to service
Powder box image
Powder coatings

Jotapipe IL

Jotapipe IL offers excellent chemical resistance to protect your pipelines and their contents.

  • Approved and safe for drinking water
  • Linings for aggressive service, including sour gas
  • Excellent chemical resistance
Jotun Jotamastic 90 GF Logo
Anticorrosive primers

Jotamastic 90 GF

A glass-flake reinforced surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Glass-flake reinforced
  • Tintable
Tank linings

Tankguard Plus

A tank lining with excellent chemical resistance that is cured for service in only five days.

  • Excellent chemical resistance
  • Sour crude oil resistant up to 160 °C
  • Cured for service in only 5 days
Tank linings

Tankguard Storage

A two-component lining with excellent chemical resistance for petroleum and crude-oil tanks.

  • Excellent chemical resistance 
  • Resistant against crude oil at temperatures up to 120°C 
  • 48-hour return to service possible for some products

Showing 18 of 33 items

Loading...