Products

Showing 16 of 16 items

Active filters:
Maintenance and repair
Jotun Jotamastic 70 Logo
Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Short overcoating intervals
  • User friendly
Jotun Pilot ACR Logo
Topcoats

Pilot ACR

Pilot ACR is a fast-drying acrylic topcoat with good colour and gloss retention.

  • Good colour and gloss retention
  • Effective application
  • Limited waste
Heat resistant coatings

Jotatemp 250

A heat-resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250°C.

  • Heat-resistant coating to temperatures between -196°C and 250°C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Jotun Pilot II Logo
Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

  • Effective application
  • Limited waste
  • Reduced application cost
Jotun Jotamastic 80 Logo
Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Can be applied at sub-zero surface temperatures
  • Good corrosion protection in atmospheric environments
jotun Jotamastic 87 Logo
Anticorrosive primers

Jotamastic 87

Jotamastic 87 is a surface-tolerant high build epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • More than 30 years track record
  • Long lifetime in high corrosivity environments
Heat resistant coatings

Epoxy HR

A heat-resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

  • Heat-resistant up to 205°C continuous
  • Suitable for maintenance
  • Can be applied on hot substrates up to 150°C
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

  • Resistant to temperatures from -196°C to 1000°C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250°C
Jotun Hardtop One Logo
Topcoats

Hardtop One

A one-component polysiloxane topcoat giving a beautiful finish by brush, roller, and airless spray.

  • Superior colour and gloss retention
  • One component for simplicity
  • Excellent application properties by brush, roller, and airless spray
Jotun Jotamastic 90 GF Logo
Anticorrosive primers

Jotamastic 90 GF

A glass-flake reinforced surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Glass-flake reinforced
  • Tintable
Powder coatings

Jotapipe RC

A two-component, solvent-free epoxy repair system that can be used to patch damage on pipe coatings.

  • Long-term anti-corrosion protection
  • Fast curing
  • Air dryed
Jotun Jotun Epoxy Filler Logo
Floor coating

Jotun Epoxy Filler

Jotun Epoxy Filler is a solvent-free filler engineered to treat substrates exposed to corrosive environments.

  • Chemical resistant
  • Resistant against crude oil up to 120*C
  • Clean petroleum product
Heat resistant coatings

Jotatemp 1000

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

  • Resistant to temperatures from -196°C to 1000°C
  • Optimized performance on carbon steel and ceramic substrates
  • Can be applied on hot substrates up to 250°C and accepts St2 surface preparation
Jotun Hardtop XP Logo
Topcoats

Hardtop XP

Hardtop XP is a polyurethane topcoat with good durability and excellent application properties.

  • Good durability
  • Excellent application properties
  • Classic polyurethane performance
Jotun Jotamastic Smart Pack HB Logo
Anticorrosive primers

Jotamastic Smart Pack HB

A high-build surface-tolerant epoxy mastic primer designed for brush and roller.

  • Made for brush and roller
  • High build
  • 1:1 easy mixing