Onshore oil, gas and petrochemicals - Products

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

Heat resistant up to 205 °C continuous
Suitable for maintenance
Can be applied on hot substrates up to 150 °C

Jotatemp 210

A heat resistant phenolic/novolac epoxy coating for temperatures from -196 to 210 °C.

Short overcoating intervals
Sub-zero application
Good adhesion to power tooled substrates

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Jotatemp 1000

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on carbon steel and ceramic substrates
Can be applied on hot substrates up to 250 °C and accepts St2 surface preparation

Unconditional steel protection

Launched in 1984, this Jotamastic range is trusted by professionals worldwide to battle corrosion. No matter the conditions - Jotamastic got you covered.

Learn more about the Jotamastic brand

Anticorrosive primers

Jotamastic 85

A multi-purpose, robust and efficient, surface tolerant primer that can be used on multiple application areas in different temperatures with short overcoating intervals.

Proving surface tolerance
Easy and efficient to use
Increased durability

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Anticorrosive primers

Jotamastic Smart Pack HB

A high-build surface-tolerant epoxy mastic primer designed for brush and roller.

Made for brush and roller
High build
1:1 easy mixing

Proven fire protection

Explosions and hydrocarbon fire represent a serious hazard in oil and gas facilities. Jotachar uses leading technologies for easy application, while meeting international safety standards.

Learn more about the Jotachar brand

Jotachar 1709 XT

Jotachar 1709 XT is a high build epoxy intumescent coating for protection against hydrocarbon fires.

All climate capability - including cold climates
Excellent application properties, even at high substrate temperatures
Robust to thermal and mechanical damage throughout installation, lifting, transportation and in-service

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

Proven all-climate performance
Tested at the world's only Arctic test station for coatings
Patent pending flexible binder technology

Jotachar 1709

A mesh-free application, passive fire protection material for hydrocarbon pool & jet fires in the hydrocarbon processing industry.

Up to 50% increase in installation efficiency
Certified to global offshore and onshore industry standards
Faster project completion with mesh-free installation

Jotachar JF750

The industry's first mesh-free application solution for all hydrocarbon pool & jet fire scenarios.

Saves up to 50% in time and costs
Faster project completion – no mesh installation
Certified to all industry standards

Trusted tank linings

Protecting tanks and the contents are vital to keep operations safe and profitable. Our Tankguard brand have been delivering protection for the most aggressive conditions since 1956.

Learn more about the Tankguard brand

Tankguard Storage

A two-component lining with excellent chemical resistance for petroleum and crude-oil tanks.

Excellent chemical resistance
Resistant against crude oil at temperatures up to 120°C
48-hour return to service possible for some products

Tankguard SF

A solvent-free tank lining that can be applied wet-on-wet for fast back-to-service performance.

High chemical resistance
Sour crude-oil resistant up to 140°C
Wet-on-wet application possible

Tankguard Plus

A tank lining with excellent chemical resistance that is cured for service in only five days.

Excellent chemical resistance
Sour crude oil resistant up to 160 °C
Cured for service in only 5 days