Products

Active filters:
Anticorrosive primers
New construction primers
Corrosion protection
Corrosion protection - atmospheric
Jotun Penguard Midcoat M20 Logo
Anticorrosive primers

Penguard Midcoat M20

A two-component, polyamine-cured epoxy coating designed as a midcoat for new construction.

  • Two-pack polyamine epoxy
  • Micaceous iron-oxide pigmented
  • Indoor EQ credit under LEED 2009
Jotun Penguard Express CF Logo
Anticorrosive primers

Penguard Express CF

Penguard Express CF is a colour flexible and fast-drying, high-build epoxy coating.

  • Tintable over MCI
  • Colour stable
  • Fast dry-to-recoat
Heat resistant coatings

Jotatemp 250

A heat-resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250°C.

  • Heat-resistant coating to temperatures between -196°C and 250°C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Jotun Penguard HSP Logo
Anticorrosive primers

Penguard HSP

Penguard HSP is a fast-drying, high-build epoxy coating for new construction.

  • Fast dry-to-recoat
  • Fast dry-to-handle
  • Low temperature application
Jotun Penguard HSP ZP Logo
Anticorrosive primers

Penguard HSP ZP

Penguard HSP ZP is a fast drying, high-build epoxy coating with active zinc phosphate.

  • Pigmented with active zinc phosphate
  • Fast dry-to-recoat
  • Fast dry-to-handle
Jotun Penguard Express ZP Logo
Anticorrosive primers

Penguard Express ZP

A fast drying and high build epoxy coating pigmented with active zinc phosphate.

  • Pigmented with active zinc phosphate
  • Fast dry-to-recoat
  • Fast dry-to-handle
Jotun Penguard W Logo
Anticorrosive primers

Penguard WF

Penguard WF is a waterborne anti-corrosive epoxy coating for new construction.

  • Versatile waterborne epoxy
  • Very low VOC emissions
  • Contributes to green building standard credits
Heat resistant coatings

Epoxy HR

A heat-resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

  • Heat-resistant up to 205°C continuous
  • Suitable for maintenance
  • Can be applied on hot substrates up to 150°C
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

  • Resistant to temperatures from -196°C to 1000°C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250°C
Jotun Penguard Express Logo
Anticorrosive primers

Penguard Express

Penguard Express is a fast drying, high-build epoxy coating.

  • Fast dry-to-recoat
  • Fast dry-to-handle
  • Wide application temperature range
Jotun Penguard Express WF Logo
Anticorrosive primers

Penguard Express WF

A two-component, waterborne, amine-cured epoxy coating designed for anti-corrosion protection.

  • Waterborne amine-cured epoxy coating
  • Excellent anti-corrosion performance
  • High-volume solids
Jotun Penguard Midcoat 20 Logo
Anticorrosive primers

Penguard Midcoat 20

A two-component polyamine-cured epoxy coating designed for anti-corrosion protection in a complete system.

  • Two-pack polyamine epoxy
  • High build
Jotatemp 210
Heat resistant coatings

Jotatemp 210

A heat-resistant phenolic/novolac epoxy coating for temperatures from -196 to 210 °C.

  • Short overcoating intervals
  • Sub-zero application
  • Good adhesion to power tooled substrates
Jotun Penguard Midcoat M20 S Logo
Anticorrosive primers

Penguard Midcoat M20 S

A two-component polyamine epoxy that provides good levelling and improved film appearance.

Heat resistant coatings

Jotatemp 540 Zinc

A heat-resistant glass flake reinforced inorganic zinc ethyl silicate coating for temperatures from 120 to 540 °C.

  • Excellent corrosion protection for continuous operating temperatures between 120°C and 540°C
  • Combined barrier and galvanic effect
  • Only zinc silicate on the market specifically designed for temperatures up to 540°C
Heat resistant coatings

Jotatemp 1000

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

  • Resistant to temperatures from -196°C to 1000°C
  • Optimized performance on carbon steel and ceramic substrates
  • Can be applied on hot substrates up to 250°C and accepts St2 surface preparation
Jotun Corroguard HB Logo
Anticorrosive primers

Corroguard HB

A high-molecular-weight epoxy coating designed as an all-purpose coating for new construction.

  • High-build all purpose coating
  • Designed for new construction
Jotun Penguard Express MIO Logo
Anticorrosive primers

Penguard Express MIO

Penguard Express MIO is a fast-drying, high-build epoxy coating enforced with MIO for new construction.

  • Enforced with Micaceous Iron Oxide (MIO)
  • Fast dry-to-recoat
  • Fast dry-to-handle

Showing 18 of 20 items

Loading...