Products

Showing 18 of 87 items

Tankguard 412
Tank linings

Tankguard 412

This solvent-free tank lining is suitable for potable water, grey water and crude-oil tanks.

  • Tank lining with good chemical resistance
  • Approved for potable water
Jotun Barrier Smart Pack Logo
Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

  • Ceramically reinforced
  • Easy 1:1 mixing
  • Surface-tolerant
Jotun Futura Classic Logo
Topcoats

Futura Classic

A cost-effective polyurethane topcoat for industrial use with an attractive appearance.

  • Attractive appearance
  • Good application properties
  • Cost effective
Jotun Hardtop Clear Logo
Topcoats

Hardtop Clear

An acrylic polyurethane clear topcoat with a high gloss finish and excellent gloss retention.

  • Highly durable finish
  • UV resistant clear coat
  • Superior chemical resistance
Jotun Penguard Midcoat M20 Logo
Anticorrosive primers

Penguard Midcoat M20

A two-component, polyamine-cured epoxy coating designed as a midcoat for new construction.

  • Two-pack polyamine epoxy
  • Micaceous iron-oxide pigmented
  • Indoor EQ credit under LEED 2009
Jotun Solvalitt 600 Logo
Heat resistant coatings

Solvalitt 600

A heat-resistant coating that provides a durable aesthetic finish up to 600 °C.

  • Heat resistance up to 600°C
  • Suitable for atmospheric environments
  • Physically drying
Jotun Hardtop Peelable TU Logo

Hardtop Peelable TU

A one-component, waterborne, physically-drying coating designed for touch-ups in a marine setting.

  • Single component, waterborne, easy disposal
  • Protects for 15 months – even against welding spatter
  • Up to 15 months of peelability​
Jotun Tankguard Type III Logo
Tank linings

Tankguard Type III

Tankguard Type III is a solvent free epoxy coating reinforced with ceramic fillers and glass flakes.

  • N-2912 Type III Petrobas Standard
  • Solvent free
  • With ceramic fillers and glass flakes
Heat resistant coatings

Jotatemp 250

A heat-resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250°C.

  • Heat-resistant coating to temperatures between -196°C and 250°C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Jotun Jotamastic 70 Logo
Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Short overcoating intervals
  • User friendly
Jotun Penguard Express CF Logo
Anticorrosive primers

Penguard Express CF

Penguard Express CF is a colour flexible and fast-drying, high-build epoxy coating.

  • Tintable over MCI
  • Colour stable
  • Fast dry-to-recoat
Jotun Pilot ACR Logo
Topcoats

Pilot ACR

Pilot ACR is a fast-drying acrylic topcoat with good colour and gloss retention.

  • Good colour and gloss retention
  • Effective application
  • Limited waste
Heat resistant coatings

Solvalitt Midtherm

A heat-resistant coating that provides a durable aesthetic finish up to 260 °C.

  • Durable finish for high-temperature areas
  • Heat resistant up to 260°C
  • Available in 15 high-temperature stable colours
Jotun Hardtop WF Logo
Topcoats

Hardtop WF

A two-component, waterborne aliphatic acrylic polyurethane environmentally friendly topcoat.

  • Waterborne PU topcoat
  • Glossy finish with very good gloss and colour retention
  • High sagging resistance
Penguard Shield GF logo
Anticorrosive primers

Penguard Shield GF

A polyamine cure high build pure epoxy coating that is glass flake reinforced.

  • High build GF reinforced epoxy primer applicable up to 500 µm in one coat
  • Abrasion resistant
  • Applicable with St2 surface treatment
Powder coatings

Jotaguard VA

Specifically designed as an anti-corrosion coating for valves and fittings.

  • Corrosion protection for valves and fittings
  • Drinking-water safe
  • WRc listed
Jotun Penguard HSP ZP Logo
Anticorrosive primers

Penguard HSP ZP

Penguard HSP ZP is a fast drying, high-build epoxy coating with active zinc phosphate.

  • Pigmented with active zinc phosphate
  • Fast dry-to-recoat
  • Fast dry-to-handle
Jotun Barrier 77 CN Logo
Anticorrosive primers

Barrier 77 CN

A two-component, fast drying polyamide cured zinc rich epoxy primer for severe corrosive environments.

  • Zinc-rich epoxy coating
  • Complies with Chinese standard for zinc-dust coatings HG/T3 668 (2009) class 2
  • Fast drying polyamide-cured zinc-rich epoxy high-durability primer