Korozyon önleyici astar

Penguard EXA II

A polyamine cured pure epoxy coating with efficient curing over a wide temperature interval.

Hakkında Penguard EXA II

Penguard EXA II is a fast drying, high solids, high build product that can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared aluminium, carbon steel, galvanized steel, shop primed steel, stainless steel substrate and aged coating surfaces. It can be applied at sub zero surface temperatures. A micaceous iron oxide (MIO) pigmented variant is available.

Teknik ayrıntılar

Ürün Kategorileri

Anticorrosive primers, Building - exterior, Building - interior, New construction primers, Exterior steel protection coatings - buildings, Interior steel protection coatings - buildings

Teknoloji

Epoxy

Alt Tabaka

Carbon steel, Aluminium, Galvanized steel, Shop primed steel, Stainless steel

Sertifikalar ve Onaylar

Certified in accordance with IMO Res.215(82) – PSPC Water Ballast Tanks.
Certified in accordance with IMO Res.288(87) – PSPC Crude Oil Tanks.
Low Flame Spread

Standartlar, sertifikalar ve diğer belgeler hakkında daha detaylı bilgi almak için lütfen TDS'e göz atın veya yerel Jotun temsilcinizle iletişime geçin.

Key features

Fast curing epoxy primer
Applicable down to -10°C
Certified IMO PSPC WBT/COT approved

İndirilebilecek belgeler

Belgelerin konumu

Teknik Veri SayfalarıPenguard EXA II, English
Uygulama kılavuzlarıPenguard EXA II, English

İlgili Ürünler

Isıya dirençli kaplamalar

Jotatemp 210

A heat resistant phenolic/novolac epoxy coating for temperatures from -196 to 210 °C.

Short overcoating intervals
Sub-zero application
Good adhesion to power tooled substrates

Korozyon önleyici astar

EasyPrime

A fast drying, epoxy mastic primer with 1:1 mixing ratio for easy touch-up.

1:1 mixing ratio for easy touch-up
Surface tolerant
Atmospheric and immersion conditions

Bina - dış cephe

Penguard Fulfill SF

Penguard Fulfill SF is a two component, solvent-free epoxy filler used for concrete protection.

Excellent water resistance
High strength filler
Compressive strength higher than concrete

Korozyon önleyici astar

Penguard HSP MIO

Penguard HSP MIO is a fast-drying, high-build epoxy coating enforced with MIO for new construction.

Enforced with Micaceous Iron Oxide (MIO)
Fast dry-to-recoat
Fast dry-to-handle

Ürünlerimiz hakkında bizimle iletişime geçin

Ürünler hakkında daha fazla bilgi almak ve projeniz için en iyi alternatifleri bulmak mı istiyorsunuz? İletişim bilgilerinizi bırakın, sizinle iletişime geçelim.