탱크 라이닝Tankguard 412This solvent-free tank lining is suitable for potable water, grey water and crude-oil tanks.Tank lining with good chemical resistance Approved for potable water
탱크 라이닝Chemflake Special글라스플레이크로 강화된 빠른 경화 비닐에스테르 도료로, 내화학성이 매우 높습니다.매우 높은 내산성 및 내화학성 뛰어난 수명 사용 가능한 상태로 빠르게 복귀
탱크 라이닝Tankguard NCVA conductive, two component, amine cured, phenolic/novolac epoxy coating for lining jet fuel tanks.Tested by SINOPEC RIPPDesigned as internal lining for jet fuel tanks
탱크 라이닝Tankguard CV ProTankguard CV Pro is a conductive lining with good chemical resistance for onshore and buried tanks.Conductive coating Good chemical resistance For onshore and buried tanks
탱크 라이닝Tankguard Plus5일 만에 사용 가능한 상태로 경화되는 탁월한 내화학성을 지닌 탱크 라이닝 도료입니다.탁월한 내화학성 최대 160°C의 사워 원유에 대한 저항성 5일 후에 사용 가능한 상태로 경화
탱크 라이닝Tankguard Storage석유 및 원유 탱크를 위한 탁월한 내화학성을 갖춘 2액형 라이닝 도료입니다.탁월한 내화학성 최대 120°C 온도의 사워 원유에 대한 저항성 일부 제품의 경우 48시간 내에 사용 가능한 상태로 복귀 가능
탱크 라이닝Tankguard SF무용제 탱크 라이닝 도료로, 습식 도포가 가능하므로 탱크를 빠른 서비스 상태로 복귀시킬 수 있습니다.높은 내화학성 최대 140의 사워 원유에 대한 저항성°C 습식 도포 가능
탱크 라이닝Tankguard Zinc솔벤트에 대해 탁월한 내화학성을 지닌 무기 규산아연 탱크 도료입니다.메탄올 및 기타 솔벤트에 대한 저항성 에어리스 스프레이를 사용해 DFT 최대 170µm로 쉽게 도장 가능하며 진흙이 갈라진 듯한 균열이 발생하지 않음 매끄러운 표면
탱크 라이닝Tankguard Type IIITankguard Type III is a solvent free epoxy coating reinforced with ceramic fillers and glass flakes.N-2912 Type III Petrobas StandardSolvent freeWith ceramic fillers and glass flakes
탱크 라이닝Chemtech GMA solvent-free coating that offers excellent chemical resistance when used as a lining in storage tanks.Solvent freeFor lining storage tanks in combination with glass fibre mats
탱크 라이닝Tankguard NCV NA two component, amine cured, phenolic/novolac conductive epoxy coating with good chemical resistance.Designed for oil and gas industry Superior chemical resistanceDesigned for refinery industry
탱크 라이닝Tankguard Type IITankguard Type II is a solvent free, polyamine cured epoxy coating designed as a tank liner.N-2912 Type II Petrobas StandardSolvent freeReinforced with ceramic fillers