
Penguard Midcoat M20
A two-component, polyamine-cured epoxy coating designed as a midcoat for new construction.
- Two-pack polyamine epoxy
- Micaceous iron-oxide pigmented
- Indoor EQ credit under LEED 2009
Resist 86 is an 85% zinc ethyl silicate primer for severe corrosive environments. Resist 86 is a high-volume solids, inorganic zinc silicate coating with 80% zinc dust, designed as a primer for coating systems where extended durability is required. Resist 86 provides very good corrosion protection when used as part of a coating system in atmospheric conditions and is heat resistant up to 400 °C. It is suitable for use on properly prepared carbon steel substrates and is easy to apply. Resist 86 complies with ASTM D520 type II zinc dust.
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
Suitable for use in mating surfaces of High Strength Friction Grip Bolted Connections:
Complies with the requirements of Research Council on Structural Connections (RCSC) Class B, Appendix A (Slip coefficient and resistance to tension creep).
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative
A two-component, polyamine-cured epoxy coating designed as a midcoat for new construction.
A heat-resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250°C.
Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.
A fast-curing, abrasion-resistant barrier coating that provides superior corrosion protection.
A video is being shown
An image is being displayed