0 favourite products

Most searched terms

Green Building Solutions Hull Skating Solutions Hull Performance Solutions Jotachar Architecture and design Offshore

Go to

Technical documents Product finder

Offshore oil and gas

About Products
About
Products

Products

Showing 18 of 76 items

Jotachar JF750 XT logo
Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

  • Proven all-climate performance
  • Tested at the world's only Arctic test station for coatings
  • Patent pending flexible binder technology
Jotun Barrier Smart Pack Logo
Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

  • Ceramically reinforced
  • Easy 1:1 mixing
  • Surface-tolerant
Jotun SeaQuantum Ultra III Logo
Fouling protection

SeaQuantum Ultra III

Low VOC antifouling, offering an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 11.7%.

  • Verifiable 2.0% speed loss
  • Up to 11.7% fuel savings
  • For low-activity trade
Jotun Penguard Universal Logo
Anticorrosive primers

Penguard Universal

Penguard Universal is a fast drying, abrasion resistant universal epoxy coating.

  • Multipurpose
  • High robustness
  • Abrasion resistant
Jotun Marathon 1000 GF Logo
Anticorrosive primers

Marathon 1000 GF

An epoxy primer with excellent impact and abrasion resistance containing 20% glass flakes.

  • Excellent impact and abrasion resistance
  • Enforced with 20% glass flakes
  • Solvent-free
Jotun Penguard Pro GF Logo
Anticorrosive primers

Penguard Pro GF

Penguard Pro GF is a glass-flake reinforced, all-round anticorrosive coating for use all year.

  • Fast dry-to-recoat
  • Fast dry-to-handle
  • High build
Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

  • Heat resistant coating to temperatures between -196 °C and 250 °C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Powder coatings

Jotaguard VA

Specifically designed as an anticorrosion coating for valves and fittings.

  • Corrosion protection for valves and fittings
  • Drinking-water safe
  • WRc listed
Jotun Barrier Logo
Anticorrosive primers

Barrier

Barrier is an 80% zinc epoxy primer for highly corrosive environments.

  • For severe corrosive environments
  • Fast dry-to-recoat
  • Fast dry-to-handle
Jotun Baltoflake Logo
Mechanically resistant coatings

Baltoflake

Baltoflake is a high-build polyester coating with an outstanding track record.

  • Exceptional lifetime in extreme conditions
  • Close to 40 years real-life North Sea experience
  • Extremely fast curing
Jotun Resist 86 Logo
Anticorrosive primers

Resist 86

Resist 86 is an 85% zinc ethyl silicate primer for severe corrosive environments.

  • Designed for severe corrosive environments
  • Fast dry-to-recoat
  • Fast dry-to-handle
Jotun Hardtop AX Logo
Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

  • Robust finish
  • Easy application
  • Superior durability
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Penguard EXA II logo
Anticorrosive primers

Penguard EXA II

A polyamine cured pure epoxy coating with efficient curing over a wide temperature interval.

  • Fast curing epoxy primer
  • Applicable down to -10°C
  • Certified IMO PSPC WBT/COT approved
Resist 78 KV logo
Anticorrosive primers

Resist 78 KV

A moisture curing inorganic zinc silicate coating with 80% zinc for severe corrosive environments.

  • Fast curing at low temperature
  • Less sensitive to low humidity
  • Mud crack resistant
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

  • Resistant to temperatures from -196 °C to 1000 °C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250 °C
Jotun Barrier Plus Logo
Anticorrosive primers

Barrier Plus

A high-solids epoxy primer with very high zinc dust content for severe corrosive environments.

  • For severe corrosive environments
  • Fast dry-to-recoat
  • Fast dry-to-handle
Jotun Baltoflake Ecolife Logo
Mechanically resistant coatings

Baltoflake Ecolife

Baltoflake Ecolife is a styrene-free, high-build polyester coating with exceptional lifetime.

  • Exceptional lifetime in extreme conditions
  • Styrene free
  • Extremely fast curing

Showing 18 of 76 items