Anticorrosive primers

Penguard HSP ZP

Penguard HSP ZP is a fast drying, high-build epoxy coating with active zinc phosphate.

See Environmental Product Declaration (EPD)

About Penguard HSP ZP

Penguard HSP ZP is a fast-drying, high-build epoxy coating with active zinc phosphate. It is a high-solids product and can be used as a primer, midcoat, finish coat or as a single-coat system in atmospheric conditions. Penguard HSP ZP has very fast dry-to-recoat or dry-to-handle properties. Penguard HSP ZP is pigmented with active zinc phosphate and is suitable for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel substrate. It can be applied down to 0C.

Technical details

Product Categories

Anticorrosive primers, New construction primers

Technology

Epoxy

Substrate

Carbon steel, Coated surfaces, Shop primed steel

Certificates and Approvals

For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.

Key features

Pigmented with active zinc phosphate
Fast dry-to-recoat
Fast dry-to-handle
Low temperature application
Designed for new construction

Downloads

Location for documents

Technical Data SheetsPenguard HSP ZP, English
Safety Data SheetsPenguard HSP ZP Comp A, English
Safety Data SheetsPenguard HSP Comp B, English
Application guidesPenguard HSP ZP, English

Related products

Anticorrosive primers

Penguard Express CF

Penguard Express CF is a high-build epoxy primer with colour flexibility, tintable via Jotun’s Multicolour Industry system for atmospheric protection.

Colour stable
Tintable over MCI
Fast dry-to-recoat

Anticorrosive primers

Penguard Midcoat M20

Penguard Midcoat M20 is a fast-curing, high-build epoxy midcoat for protection in atmospheric environments.

Fast dry-to-recoat
Fast dry-to-handle
Optimized for new construction

Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
Can be applied on hot substrates up to 250 °C

Heat resistant coatings

Jotatemp 210

A heat resistant phenolic/novolac epoxy coating for temperatures from -196 to 210 °C.

Short overcoating intervals
Sub-zero application
Good adhesion to power tooled substrates

Contact us about products

Do you want to know more about products and how we can help you find the best alternatives for your project? Submit your contact details here and we'll get in touch.