0 favourite products

Most searched terms

Green Building Solutions Hull Skating Solutions Hull Performance Solutions TankFast Thermosafe Jotachar Architecture and design Offshore

Go to

Technical documents Product finder

Onshore oil, gas and petrochemicals

About Products
About
Products

Products

Showing 13 of 13 items

Active filters:
Americas
United States
Maintenance and repair
Heat resistant coatings

Jotatemp 250

A heat-resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250°C.

  • Heat-resistant coating to temperatures between -196°C and 250°C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Jotun Jotamastic 70 Logo
Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Short overcoating intervals
  • User friendly
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Jotun Pilot II Logo
Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

  • Effective application
  • Limited waste
  • Reduced application cost
Jotun Jotamastic 80 Logo
Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Can be applied at sub-zero surface temperatures
  • Good corrosion protection in atmospheric environments
Heat resistant coatings

Epoxy HR

A heat-resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

  • Heat-resistant up to 205°C continuous
  • Suitable for maintenance
  • Can be applied on hot substrates up to 150°C
Heat resistant coatings

Jotatemp 1000

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

  • Resistant to temperatures from -196°C to 1000°C
  • Optimized performance on carbon steel and ceramic substrates
  • Can be applied on hot substrates up to 250°C and accepts St2 surface preparation
Jotun Hardtop XP Logo
Topcoats

Hardtop XP

Hardtop XP is a polyurethane topcoat with good durability and excellent application properties.

  • Good durability
  • Excellent application properties
  • Classic polyurethane performance
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat-resistant coating for temperatures from -196 to 1000°C, where substrates allow.

  • Resistant to temperatures from -196°C to 1000°C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250°C
Jotun Jotamastic 90 GF Logo
Anticorrosive primers

Jotamastic 90 GF

A glass-flake reinforced surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Glass-flake reinforced
  • Tintable
Powder coatings

Jotapipe RC

A two-component, solvent-free epoxy repair system that can be used to patch damage on pipe coatings.

  • Long-term anti-corrosion protection
  • Fast curing
  • Air dryed
Jotun Jotamastic Smart Pack HB Logo
Anticorrosive primers

Jotamastic Smart Pack HB

A high-build surface-tolerant epoxy mastic primer designed for brush and roller.

  • Made for brush and roller
  • High build
  • 1:1 easy mixing
Jotun Jotun Epoxy Filler Logo
Floor coating

Jotun Epoxy Filler

Jotun Epoxy Filler is a solvent-free filler engineered to treat substrates exposed to corrosive environments.

  • Chemical resistant
  • Resistant against crude oil up to 120*C
  • Clean petroleum product

Showing 13 of 13 items