Products

Active filters:
Americas
United States
Maintenance and repair
Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

  • Heat resistant coating to temperatures between -196 °C and 250 °C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Jotun Jotamastic 70 Logo
Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Short overcoating intervals
  • User friendly
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Jotun Pilot II Logo
Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

  • Effective application
  • Limited waste
  • Reduced application cost
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

  • Resistant to temperatures from -196 °C to 1000 °C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250 °C
Jotun Jotamastic 80 Logo
Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Can be applied at sub-zero surface temperatures
  • Good corrosion protection in atmospheric environments
Heat resistant coatings

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

  • Heat resistant up to 205 °C continuous
  • Suitable for maintenance
  • Can be applied on hot substrates up to 150 °C
Heat resistant coatings

Jotatemp 1000

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

  • Resistant to temperatures from -196 °C to 1000 °C
  • Optimized performance on carbon steel and ceramic substrates
  • Can be applied on hot substrates up to 250 °C and accepts St2 surface preparation
Jotamastic 85 logo
Anticorrosive primers

Jotamastic 85

A multi-purpose, robust and efficient, surface tolerant primer that can be used on multiple application areas in different temperatures with short overcoating intervals.

  • Proving surface tolerance
  • Easy and efficient to use
  • Increased durability
Jotun Hardtop XP Logo
Topcoats

Hardtop XP

Hardtop XP is a polyurethane topcoat with good durability and excellent application properties.

  • Good durability
  • Excellent application properties
  • Classic polyurethane performance
Jotun Jotamastic Smart Pack Logo
Anticorrosive primers

Jotamastic Smart Pack

A surface-tolerant epoxy mastic primer designed for maintenance and repair with brush and roller.

  • Made for brush and roller
  • 1:1 easy mixing
  • Saves time and money
Jotun Jotamastic 90 GF Logo
Anticorrosive primers

Jotamastic 90 GF

A glass-flake reinforced surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Glass-flake reinforced
  • Tintable
Jotun Jotamastic Smart Pack HB Logo
Anticorrosive primers

Jotamastic Smart Pack HB

A high-build surface-tolerant epoxy mastic primer designed for brush and roller.

  • Made for brush and roller
  • High build
  • 1:1 easy mixing
Jotun Jotun Epoxy Filler Logo
Floor coating

Jotun Epoxy Filler

Jotun Epoxy Filler is a solvent-free filler engineered to treat substrates exposed to corrosive environments.

  • Chemical resistant
  • Resistant against crude oil up to 120*C
  • Clean petroleum product

Showing 14 of 14 items

Loading...