Products for offshore oil and gas

Products

Middle East, India & Africa

Saudi Arabia

Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

Ceramically reinforced
Easy 1:1 mixing
Surface-tolerant

Anticorrosive primers

Penguard Pro GF

Penguard Pro GF is a glass-flake reinforced, all-round anticorrosive coating for use all year.

Fast dry-to-recoat
Fast dry-to-handle
High build

Anticorrosive primers

Penguard Universal

Penguard Universal is a fast drying, abrasion resistant universal epoxy coating.

Multipurpose
High robustness
Abrasion resistant

Anticorrosive primers

Marathon 1000 GF

An epoxy primer with excellent impact and abrasion resistance containing 20% glass flakes.

Excellent impact and abrasion resistance
Enforced with 20% glass flakes
Solvent-free

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

Proven all-climate performance
Tested at the world's only Arctic test station for coatings
Patent pending flexible binder technology

Fire protection coatings

Jotachar 1709 XT

Jotachar 1709 XT is a high build epoxy intumescent coating for protection against hydrocarbon fires.

All climate capability - including cold climates
Excellent application properties, even at high substrate temperatures
Robust to thermal and mechanical damage throughout installation, lifting, transportation and in-service

Powder coatings

Jotaguard VA

Specifically designed as an anticorrosion coating for valves and fittings.

Corrosion protection for valves and fittings
Drinking-water safe
WRc listed

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Anticorrosive primers

Barrier

Barrier is an 80% zinc epoxy primer for highly corrosive environments.

For severe corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Resist 86

Resist 86 is an 85% zinc ethyl silicate primer for severe corrosive environments.

Designed for severe corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Mechanically resistant coatings

Baltoflake

Baltoflake is a high-build polyester coating with an outstanding track record.

Exceptional lifetime in extreme conditions
Close to 40 years real-life North Sea experience
Extremely fast curing

Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
Can be applied on hot substrates up to 250 °C