Global site
Fenomastic Emulsion Primer is a water-based emulsion primer that is alkali resistant, eliminating chalky surfaces. It is specially formulated to penetrate the substrate, filling cracks and dents and protecting the concrete. This product preserves the aesthetics of a wall by covering stains to prevent them bleeding into the new paint. It also increases the adhesion capabilities of the paint on the wall, making it last longer and reducing costs.
This primer has antibacterial properties that ensure hygienic standards are maintained at all times, making it suitable for use in healthcare, hospitality and other interiors that require high levels of hygiene.
Fenomastic Emulsion Primer has low VOC to ensure good indoor air quality. Once applied, it leaves a smooth and even surface that is ready for painting.
For more detailed product and colour information, please visit Fenomastic Emulsion Primer
This product contributes to Green Building Standard credits by meeting the following specific requirements:
LEED®v4 (2013) / LEED®v4 .1 (2019 ):
EQ credit: Low emitting materials
- VOC content for Primers, Sealers and Undercoaters (100 g/l) (CARB (SCM)2007) and emission lower than or equal to 0,5 mg/m3 (CDPH method 1.2)
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2016)
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2013)
Hea 02: VOC content for Interior matt walls and ceilings (Gloss <25 at 60°) (30 g/l) (EU Directive 2004/42/CE).
Standartlar, sertifikalar ve diğer belgeler hakkında daha detaylı bilgi almak için lütfen TDS'e göz atın veya yerel Jotun temsilcinizle iletişime geçin.
Jota-Etch is a modified etch primer that improves adhesion between the substrate and the next coat.
A two-component, polyamine-cured epoxy coating designed as a midcoat for new construction.
Pilot WF SM is an easy-to-apply one component topcoat with a premium finish for SteelMaster.
Long lasting beauty.
Ürünler hakkında daha fazla bilgi almak ve projeniz için en iyi alternatifleri bulmak mı istiyorsunuz? İletişim bilgilerinizi bırakın, sizinle iletişime geçelim.
A video is being shown
An image is being displayed
A brochure is being displayed
