Products for passenger services

Products

Please contact your local Sales Representative from Jotun for product availability in your country.

Middle East, India & Africa

India

Topcoats

Hardtop Eco

A polyurethane topcoat with a durable, premium finish – contributing to LEED and BREEAM credits.

Durable finish
Very good colour- and gloss retention
Contributes to green building standard credits

Fouling protection

SeaQuantum Ultra III

Low VOC antifouling, offering an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 11.7%.

Verifiable 2.0% speed loss
Up to 11.7% fuel savings
For low-activity trade

Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to Green Building Standard credits.

Surface-tolerant
Short overcoating intervals
User friendly

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Mechanically resistant coatings

Marathon IQ2

Marathon IQ2 is a smooth-surface coating with ice-slip properties.

Smooth surface
Ice-slip properties
High impact and abrasion resistance

Anticorrosive primers

Balloxy HB Light

A high build epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

IMO PSPC for WBT approved
Surface-tolerant
High solids

Topcoats

Hardtop Pro

Hardtop Pro is a premium, durable polysiloxane topcoat with a superior, long-lasting appearance.

Superior colour and gloss retention
Excellent long-lasting appearance
Excellent application properties

Anticorrosive primers

Alkydprimer

Alkydprimer is an easy to use, one-component oxidatively drying alkyd coating.

Low application cost
Resistant to dry heat up to 120 C
Easy to use

Topcoats

Hardtop Optima

A polysiloxane topcoat with a durable, premium finish and excellent application properties.

Outstanding durability
Excellent colour and gloss retention
Isocyanate-free for a safer work environment

Anticorrosive primers

Jotamastic 87

Jotamastic 87 is a surface-tolerant high build epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
More than 30 years track record
Long lifetime in high corrosivity environments

Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
Can be applied at sub-zero surface temperatures
Good corrosion protection in atmospheric environments

Heat resistant coatings

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

Heat resistant up to 205 °C continuous
Suitable for maintenance
Can be applied on hot substrates up to 150 °C

Anticorrosive primers

Balloxy BT

An epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

Surface-tolerant
High solids
IMO PSPC for WBT and COT approved

Topcoats

Hardtop XP II

Hardtop XP II is an exceptionally versatile and efficient topcoat that provides a solution for countless scenarios, where durability and performance are key priorities.

Lasting aesthetics
Exceptional versatility
Improved hardness development

Heat resistant coatings

Jotatemp 210

A heat resistant phenolic/novolac epoxy coating for temperatures from -196 to 210 °C.

Short overcoating intervals
Sub-zero application
Good adhesion to power tooled substrates

Showing 18 of 61 items

Most searched terms

Go to

Passenger services

Products