Products for refineries

Products

Europe & Central Asia

Sweden

Maintenance and repair

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to Green Building Standard credits.

Surface-tolerant
Short overcoating intervals
User friendly

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Topcoats

Jotatop Pro

Jotatop Pro is an isocyanate free two-component acrylic coating.

Fast drying and hardness development
Very good weather resistance
Isocyanate free

Anticorrosive primers

Jotamastic 87

Jotamastic 87 is a surface-tolerant high build epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
More than 30 years track record
Long lifetime in high corrosivity environments

Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
Can be applied at sub-zero surface temperatures
Good corrosion protection in atmospheric environments

Heat resistant coatings

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

Heat resistant up to 205 °C continuous
Suitable for maintenance
Can be applied on hot substrates up to 150 °C

Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
Can be applied on hot substrates up to 250 °C

Topcoats

Hardtop One

A one-component polysiloxane topcoat giving a beautiful finish by brush, roller, and airless spray.

Superior colour and gloss retention
One component for simplicity
Excellent application properties by brush, roller, and airless spray

Topcoats

Hardtop XP II

Hardtop XP II is an exceptionally versatile and efficient topcoat that provides a solution for countless scenarios, where durability and performance are key priorities.

Lasting aesthetics
Exceptional versatility
Improved hardness development

Heat resistant coatings

Jotatemp 210

A heat resistant phenolic/novolac epoxy coating for temperatures from -196 to 210 °C.

Short overcoating intervals
Sub-zero application
Good adhesion to power tooled substrates

Heat resistant coatings

Jotatemp 1000

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on carbon steel and ceramic substrates
Can be applied on hot substrates up to 250 °C and accepts St2 surface preparation

Anticorrosive primers

Jotamastic 85

A multi-purpose, robust and efficient, surface tolerant primer that can be used on multiple application areas in different temperatures with short overcoating intervals.