Certificates and approvals
Jotun’s coatings and coating systems are extensively tested by professional test institutes and classification societies.

A number of coating systems have been tested and pre-qualified to NORSOK M-501:
Select system below to see the alternative coating systems

Coating system no. 1
Carbon steel with maximum operating temperature < 120°C
– Structural steel
– Exteriors of equipment, vessels, piping and valves (not insulated)
Coating system no. 2
Carbon steel with operating temperature > 120°C
– All insulated surfaces of tanks, vessels, piping
– Flare booms and crane booms
Underside of bottom deck included piping, jacket above splash zone and life boat stations are optional areas (to be decided in each project)
Coating system no. 7
Submerged carbon steel and carbon steel in the splash zone
Submerged stainless steel and stainless steel in the splash zone
Coating system no. 8
Structural carbon steel with operating temperature ≤80°C in internal and fully dry and ventilated areas
Coating system no. 9
Bulk supplied carbon steel valves with operating temperature up to 150°C
-
NORSOK Systems
Select system below to see the alternative coating systems
Coating system no. 1
Carbon steel with maximum operating temperature < 120°C
– Structural steel
– Exteriors of equipment, vessels, piping and valves (not insulated)
Coating system no. 2
Carbon steel with operating temperature > 120°C
– All insulated surfaces of tanks, vessels, piping
– Flare booms and crane booms
Underside of bottom deck included piping, jacket above splash zone and life boat stations are optional areas (to be decided in each project)
Coating system no. 7
Submerged carbon steel and carbon steel in the splash zone
Submerged stainless steel and stainless steel in the splash zone
Coating system no. 8
Structural carbon steel with operating temperature ≤80°C in internal and fully dry and ventilated areas
Coating system no. 9
Bulk supplied carbon steel valves with operating temperature up to 150°C
-
MED-B Certificates
EU Marine Equipment Directive (MED)
Marine Equipment Directive (MED) is an authorisation of equipment and products for the Marine industry. Marine equipment can only be installed on board ships flying the flag of an EU country, Norway, Iceland and other flag states if it is marked with the MED mark of conformity, also known as the “wheelmark”.
Materials and equipment to which the Marine Equipment Directive (MED) shall apply:- marine pollution prevention equipment;
- fire protection constructions;
- life-saving appliances;
- navigation equipment;
- radio installations;
- navigation lights.
Jotun Powder Coatings together with Marine paints is now a Single Source Solution providing a single global source of paints and coatings to make the design, specify, beautify and protect ships' equipment easier.