Recommended use:

For use on exterior surfaces like concrete, cement plaster etc. where a textured finish is required that can protect the substrate from concrete carbonation, chloride attack, substrate cracks, effects of UV and other environment elements. Additional properties like moisture permeability and liquid water resistance will protect the surface against effects of moisture and water.  It is also widely used for protection of exposed concrete structures such as bridges, tunnels etc. Substrate Applicable: Cement plaster, concrete, block work, rendered surfaces etc.
Surface preparation:

The surface must be clean, dry, fully cured and totally free from dirt, dust, loose particles and other contaminations like oil, grease and chemicals like curing agents, form releasing agents etc. Remove all loose particles, sharp edges, nibs etc. by abrading the surface with sand paper, rubbing stone, stiff bristle brush etc. and remove the accumulated dust. 

Typical Paint System

On Concrete & Plaster
1 coat Jotashield Penetrating Primer
2 coats Jotashield Tex Ultra
(Use Jotashield Filler for minor filling/smoothening after the primer)