Jetties have a unique situation of being exposed to extreme environmental conditions whilst at the same time being a conveyor, road and services track which have a separate range of technical needs.
Corrosion protection in a marine environment
Jotun has the advantage of being a world leader in the offshore and marine coating industry. That experience combined with our knowledge of the mining industry allows us to provide optimised solutions for corrosion protection of jetties and export terminals.
Corrosion challenges for jetties
It is often best to break down a jetty into its components to see how to best protect these. Splash zones and underwater areas need typical maritime coating systems with hard wearing coatings that tolerate impact and abrasion. Above the water line the type of structure must be considered. The conveyors need to be protected against the marine environment and the same for the shiploader.
It does not need to be complicated thinking – but understanding the needs is critical, and here is where Jotun can support you.
Brands for jetties and terminals
-
Solutions
Jetties have a unique situation of being exposed to extreme environmental conditions whilst at the same time being a conveyor, road and services track which have a separate range of technical needs.
Corrosion protection in a marine environment
Jotun has the advantage of being a world leader in the offshore and marine coating industry. That experience combined with our knowledge of the mining industry allows us to provide optimised solutions for corrosion protection of jetties and export terminals.
Corrosion challenges for jetties
It is often best to break down a jetty into its components to see how to best protect these. Splash zones and underwater areas need typical maritime coating systems with hard wearing coatings that tolerate impact and abrasion. Above the water line the type of structure must be considered. The conveyors need to be protected against the marine environment and the same for the shiploader.
It does not need to be complicated thinking – but understanding the needs is critical, and here is where Jotun can support you.Brands for jetties and terminals
-
Products
Discover the recommended coatings for jetties and terminals
Affichage 36 products -
Systems
Tailor-made coating solutins for protection of jetties
New construction
At new construction stage quality and time are two of the main factors. By choosing coatings that will suit the fabrication while at the same time provide the expected lifetime performance, you have an optimised system.
Maintenance
In a maintenance situation one often has limitations on what can be done with regards to surface preparation, and time is usually a factor as well. Surface tolerant coatings, coatings that will continue to cure under water or quick curing systems are all solutions that would be ideal in a maintenance situation.
Which system to select is all down to your specific needs and challenges, and here Jotun can offer expert advice and support. Contact a local sales person for more information on our coating solutions for jetties.
Tested and pre-qualified
Coating systems pre-qualified according to NORSOK M-501 rev. 6, system 7A - carbon steel, splash zone and system 7B - carbon steel, submerged ≤ 50°C:- 2 x Baltoflake
- 2 x Marathon 500
- 2 x Penguard Pro GF
NORSOK Systems No 7
Pre-qualified coatings for jetties and terminals
- References