Products for refineries

Heat resistant coatings

Jotatemp 250

A heat-resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat-resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to LEED and BREEAM credits.

Surface-tolerant
Short overcoating intervals
User friendly

Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

Ceramically reinforced
Easy 1:1 mixing
Surface-tolerant

Heat resistant coatings

Epoxy HR

A heat-resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

Heat-resistant up to 205 °C continuous
Suitable for maintenance
Can be applied on hot substrates up to 150 °C

Anticorrosive primers

Penguard Express

Penguard Express is a fast drying, high-build epoxy coating.

Fast dry-to-recoat
Fast dry-to-handle
Wide application temperature range

Anticorrosive primers

Barrier 80 S

Barrier 80 S is a high-solids epoxy primer with 80% zinc dust for severe corrosive environments.

For severe corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Jotamastic 85

A multi-purpose, robust and efficient, surface tolerant primer that can be used on multiple application areas in different temperatures with short overcoating intervals.

Proving surface tolerance
Easy and efficient to use
Increased durability

Heat resistant coatings

Jotatemp 1000

A heat-resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on carbon steel and ceramic substrates
Can be applied on hot substrates up to 250 °C and accepts St2 surface preparation

Anticorrosive primers

Resist 78

Resist 78 is an 80% zinc ethyl silicate primer for severe corrosive environments.

Designed for severe corrosive environments
High volume solids
Fast dry-to-recoat

Floor coating

Jota Armour

Jota Armour is a tough, abrasion-resistant coating designed as an anti-skid coating for decks and walkways.

Tough anti-skid coating for decks and walkways
Very high abrasion resistance
High-solids, surface-tolerant coating

Anticorrosive primers

Pilot QD Primer

Pilot QD Primer is a one-component oxidatively drying alkyd primer with zinc phosphate.

Fast drying
One component - reduced waste

Anticorrosive primers

Penguard Express CF

Penguard Express CF is a colour flexible and fast-drying, high-build epoxy coating.

Tintable over MCI
Colour stable
Fast dry-to-recoat

Heat resistant coatings

Jotatemp 1000 HT

A heat-resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
Can be applied on hot substrates up to 250 °C