Products for energy industries

Products

Browse products for energy industries.

South East Asia & Pacific

Cambodia

Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

Ceramically reinforced
Easy 1:1 mixing
Surface-tolerant

Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to Green Building Standard credits.

Surface-tolerant
Short overcoating intervals
User friendly

Anticorrosive primers

Marathon 1000 GF

An epoxy primer with excellent impact and abrasion resistance containing 20% glass flakes.

Excellent impact and abrasion resistance
Enforced with 20% glass flakes
Solvent-free

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

Proven all-climate performance
Tested at the world's only Arctic test station for coatings
Patent pending flexible binder technology

Fire protection coatings

Jotachar 1709 XT

Jotachar 1709 XT is a high build epoxy intumescent coating for protection against hydrocarbon fires.

All climate capability - including cold climates
Excellent application properties, even at high substrate temperatures
Robust to thermal and mechanical damage throughout installation, lifting, transportation and in-service

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Mechanically resistant coatings

Baltoflake

Baltoflake is a high-build polyester coating with an outstanding track record.

Exceptional lifetime in extreme conditions
Close to 40 years real-life North Sea experience
Extremely fast curing

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Building - exterior

Primax Defend

Primax Defend is zinc-free powder primer with standard corrosion resistance.

Very good corrosion protection
Very good mechanical properties
Protection for up to C4 Very High corrosivity category

Topcoats

Hardtop Pro

Hardtop Pro is a premium, durable polysiloxane topcoat with a superior, long-lasting appearance.

Superior colour and gloss retention
Excellent long-lasting appearance
Excellent application properties

Anticorrosive primers

Penguard WF

Penguard WF is a waterborne anticorrosive epoxy coating for new construction.

Versatile waterborne epoxy
Very low VOC emissions
Contributes to green building standard credits

Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
Can be applied at sub-zero surface temperatures
Good corrosion protection in atmospheric environments

Anticorrosive primers

Marathon 550

Marathon 550 is a surface tolerant, abrasion resistant epoxy primer for high corrosivity areas.

Surface tolerant
Can be applied on damp surfaces
High abrasion and impact resistance

Anticorrosive primers

Marathon 1000 XHB

Marathon 1000 XHB is an epoxy primer with excellent impact and abrasion resistance.

Excellent impact and abrasion resistance
High-build
Solvent-free

Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

Resistant to temperatures from -196 °C to 1000 °C
Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
Can be applied on hot substrates up to 250 °C

Anticorrosive primers

Barrier 77

Barrier 77 is a 77% zinc dust epoxy primer for corrosive environments.

For corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Showing 18 of 42 items

Most searched terms

Go to

Products