 |
| Muki EPS applied on steel beams in a shoppirmer plant |
Find which shopprimer to use based on the required cutting and welding properties:
Muki Z 2001
- Optimum cutting and welding
- Low zinc content
- Two pack - silicate solution and zinc paste
- 30% by weight of zinc in dry film
- 24 hours pot life - depending on temperature
Muki Z 3000
- Good cutting and welding
- Medium zinc content
- Two pack - silicate solution and zinc paste
- 50% by weight of zinc in dry film
- 24 hours pot life - depending on temperature
Muki AC
- Good cutting and welding, water borne
- Iron oxide pigmented
- One component acrylic
- Combining 3–5 months corrosion protection with improved health, safety and environmental properties (VOC 97 g/litre)
Muki EPS
- Fair cutting and welding
- Iron oxide pigmented
- Two pack epoxy
- A multi-functional quick drying primer serving 3 functions:
- traditional shopprimer (20 microns)
- primer applied in the shopprimer plant (35-40 microns)
- holding primer applied with traditional air less spray equipment (20-40 microns).
- 24-36 hours pot life - depending on temperature
Other Jotun shopprimers
Muki PVB 1-pack
Muki PVP 2-pack
Go to Marine Coatings > Areas of activity > Newbuilding
Go to Marine Coatings > Products
Go to Protective Coatings > Products
